Troubleshooting - Black & Decker SM1610 Instruction Manual

Recommended accessories for use with your appliance are available from your local
dealer or authorized service center. If you need assistance regarding accessories, please
call: 1-800-544-6986.
The use of any accessory not recommended for use with this
appliance could be hazardous.
WARNING:
• Unit will not start.
PROBLEM
• Mop will not make steam. • No water in water tank.
• Mop leaves water on floor. • Cleaning pad is too wet. • Unplug unit from power outlet
• Mop left spot on floor.
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK & DECKER help line at
1-800-544-6986.
All manuals and user guides at all-guides.com
ACCESSORIES

TROUBLESHOOTING

• Cord not plugged in.
POSSIBLE CAUSE
• Circuit fuse is blown.
• Circuit breaker is tripped. • Reset circuit breaker. (If the
• Cord or switch is
damaged.
• Water tank cap is not
screwed on correctly.
• Mop left in one spot too
long.
• Hard water.
9
• Plug appliance into a working
POSSIBLE SOLUTION
outlet.
• Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue
use immediately and have it
serviced at a Black & Decker
service center or authorized
servicer.)
product repeatedly causes the
circuit breaker to trip,
discontinue use immediately
and have it serviced at a Black &
Decker service center or
authorized servicer.)
• Have cord or switch replaced
at a Black & Decker Service
Center or Authorized Servicer.
• Add water to the water tank.
• Please ensure the filler cap is
screwed on straight and tight in
order to ensure the tank receives
the necessary pressure to
produce steam.
and change the micro-fiber
cleaning pad.
• Never leave the steam mop on
the floor with a damp or wet
cleaning pad still attached when
not in use.
• Use distilled water.