Table of Contents
Advertisement
Service Diagnostics and Procedures
Infrared Rotisserie Burner (continued)
2. Locate rotisserie burner cover(s). Remove
screws securing igniter cover.
Igniter Cover
3. Remove screws and rear access panel.
Remove screws securing burner(s).
Rear View
Screws
© 2009 Viking Preferred Service
Screws
4. Remove burner from opening.
5. Reverse procedure to reassemble.
If burner fails to light, verify spark at igniter and gas
flow. If no spark at igniter, verify the igniter has
0
and no visual cracks. If igniter is proper and still
Ω
no spark, verify igniter wires and ignition module.
If wiring is good and the battery is proper at the
module, replace the module. If no gas flow, verify
the supply tube is not kinked or restricted, that the
supply is sufficient, and gas is on.
Note: VGIQ530-4RT model shown
28
Hide quick links:
Advertisement
Table of Contents
