Advertisement
OPERATION INSTRUCTION
Control Panel
The control panel will look like the following:
NOTE: The outline of the operation panel is based on typical model, the function is same with the actual
machine even some differences may exist in appearance.
Vent Control
The vent control is located above the control panel. The operation method is different
on different models (see the following figures).
For maximum cooling efficiency, CLOSE the vent. This will allow internal air circulation.
OPEN the vent to discharge stale air.
CLOSE
To open the vent, pull the lever toward
To close it, push it in.
VENT
OPEN
CLOSE
To open the vent, set the lever to the right position
To close it, set the lever in the left position.
6
OPEN
Advertisement
