Installing Your Camera
Preparing Adapter and Cables
– Power Adapter
Power adapter has the capacity of AC24V 2.5A.
– Video Cable
A BNC coaxial cable shown in the picture is required to connect Speed Dome's video
output terminal to the monitor.
– Communications Cable
For the camera to communicate with the controller, a RS-485/422 communications line is
required. To ensure the quality of long distance communications and the accuracy of the
overall communications, using a twisted pair cable such as UTP Cable is recommended.
* Caution!
Depending on the camera's environment, the communications distance may vary.
Notes
• N eitherthevideonorcommunicationscableisenclosedwiththecamera.
26
SPEED DOME CAMERA
User's Manual
Distance
Recommended Cable Specification
500m or shorter
5C2V Coaxial Cable
500m or longer
7C2V Coaxial Cable
Installing Your Camera
Preparing and Installing Camera Bracket
For the installation guidelines for the brackets and housings, refer to the user's manual
enclosed with the bracket or housing that is sold separately.
• Camera Wiring Diagram 1
SPEED DOME CAMERA
27
User's Manual