Scanning An Image - Epson Expression 10000XL Specifications

Epson Expression 10000XL

Scanning an Image

First, place your document on the scanner as described on
page 5. Then follow these steps to start EPSON Scan and scan
an image into an application:
1. Turn on the scanner, and wait about 30 seconds for it to
initialize. The green
Ready
2. Open your imaging application, then choose the
) option in the application and select
Acquire
.
Expression 10000XL
Note: If you are using Windows XP and choose WIA-
EPSON Expression 10000XL, certain features won't be
available.
The EPSON Scan dialog box opens.
Choose a mode
3. Choose a mode from the Mode list at the top of the
EPSON Scan screen. (See page 5 for a description of the
modes.)
4. Adjust any settings in EPSON Scan, as needed. For
example, if you're using Home Mode, select the
, , and
Type Image Type
appropriate for your image and how you want to use it.
6 - Epson Expression 10000XL
light stops flashing and stays on.
Import
Epson
Document
settings that are
Destination
5. Click the
Preview
(or
Note: The Thumbnail preview screen is shown above.
Depending on your selected mode, you may see the Normal
preview screen instead. To switch between preview
screens, click the arrow next to the Preview button and
choose
Thumbnail
In Home Mode, you can click the
make the preview screen open automatically whenever you
launch EPSON Scan.
6. Click and drag within the preview image to select the area
you want to scan.
Note: Image quality adjustments are automatically applied
to the selected area, unless you've turned off the
Continuous auto exposure setting (click the
button, then click the
best results, select only the part of the image you want to
scan.
7. If you're previewing your image as a thumbnail (as shown
above), click the
Click the
8. Click .
Scan
9. When scanning completes, click
and view the scanned image in your imaging application.
5/04
button to see a preview of your scan.
or .
Normal
Auto preview
tab to access this setting). For
Color
button to rotate the image, if needed.
button to mirror the image.
to exit EPSON Scan
Close
checkbox to
Configuration