Changing The Printer Paper - Midtronics MDX-300 Series Instruction Manual

Changing the Printer Paper

The roll size is 2-1/4 inches wide by 1-7/8 inch in diameter. Replacement
rolls are available at most office supply stores.
The tester uses only thermal printing paper.
To replace the paper roll:
1. Unlock the printer door by gently pressing forward on the red lever.
Remove the spent roll.
paper
compartment
paper
sensor
2. Place a new roll of paper in the compartment, and pull the paper for-
ward so that it extends past the serrated edge of the paper slot.
paper feeds from
underneath the roll
3. Close the door and make sure the lever locks securely.
paper
NOTE: For a clean tear, pull the paper along the edge of the plastic.
Do not pull the paper straight out of the printer.
release lever: press in this direction
15
• •
MDX-300 Series