Table of Contents
Advertisement
In general, it is recommended to disconnect your filter and clean the impeller
and sponge monthly. The unit will become blocked with waste and protein
slime over time, so regular cleaning is important for optimal performance.
The frequency of how often you will need to clean and inspect your unit of
course will depend on a lot of factors like how dirty the water is when you first
start using your filter, the volume of your water and also how many fish you
have. How often you feed your fish and how long your lighting is on for will also
affect how quickly your aquarium water gets dirty and will need to be taken into
consideration when planning how often to clean your unit.
UV OPERATION
Always ensure that the filter has water flowing through the unit prior to
·
operating the UV.
Never look directly at the UV light when operational.
·
Check that the UV is operational visually using the UV indicator.
·
Never operate the UV lamp outside its housing.
·
Never operate the UV lamp in a housing that's defective
·
O-rings
It is vital that O-rings are regularly inspected and replaced as the rubber
watertight seal will perish over time, which may cause leaks. Before replacing
your o-rings, ensure they are well lubricated.
Replacing the UV Bulb
NEVER look directly at the UV light.
When replacing your UV bulb, use this time to clean your quartz sleeve and
carefully examine for any damage or cracks. Take care when handling the
quartz sleeve and UV bulb to avoid any damage to the glass.
Advertisement
Table of Contents
