Maintenance - AllPondSolutions 700IF+ Quick Start Manual

Aquarium internal filter with uv
Table of Contents

Advertisement

ELECTRIC
This unit comes complete with a generous supply of 3 core cable, however
should any additional cable be required, the use of an approved waterproof
cable connector with a proper rating is essential. A cord rated for less amperes
or watts than the appliance rating may overheat.
Please Ensure:
The power supply must be earthed and fused at 3amps.
·
You regularly inspect the cable for damage and deterioration.
·
Do not connect to any voltage other than that stated.
·
You consult a qualified electrician if in doubt about any aspects of
·
wiring.

MAINTENANCE

To ensure optimal performance and that your unit functions correctly, regular
maintenance is essential. Failure to do so may result in damage to your unit and
may invalidate your warranty.
We recommend that a regular cleaning and maintenance schedule is followed
to ensure responsible fishkeeping. Depending on water volume and stocking
levels, regular cleaning of the filter media, foams, impeller, inlet/outlet
pipework during a 10-25% water change will help ensure that the product works
efficiently and the aquarium remains healthy.
For further maintenance guidance, please see the table and additional
information below:
Impeller
Shaft
O-Rings
Filter Foam &
Other Media
UV Bulb
Quartz Sleeve
1 MONTH
Clean & Inspect
Clean & Inspect
Clean & Inspect
Lubricate &
Clean
Clean & Inspect
Clean & Inspect
3 MONTHS
6 MONTHS
Replace as
required
Replace
ANNUALLY
Replace
Replace
Replace

Advertisement

Table of Contents
loading

Table of Contents