Adding A Zone To An Existing Wireless System - Using A Wi-Fi Network - Nuvo NV-P200 Series Product Manual

NUVO

2.3 Adding a zone to an existing Wireless System - Using a Wi-Fi Network

IMPORTANT Wireless configuration setup considerations:
Supported network modes and encryption methods:
It is recommended that 802.11n, WPA2 be used.
802.11ac not supported, wireless access points must be in 80.11n or 802.11n/ac mixed mode.
WEP only supported by selecting "other," located at the bottom of the "Wireless Setup" page.
WPA2 is only supported using AES.
Unsupported network modes and encryption methods will be grayed out. The following network encryption types are not
supported:
WPA1
WPA2 Enterise
Guest networks
Fig. 47
®
Fig. 48
Connect player to Ethernet and turn on.
Open the Nuvo Player app on a tablet or smart phone con-
nected to the same network.
Navigate to the Settings menu by pressing the gear icon at
the bottom of the home page. (Fig. 47)
Select "Add a Nuvo Component." (Fig. 48)
23