Product Features; Nv-P3100-Xx 3-Zone Player (Ethernet) - Nuvo NV-P3100 series Product Manual

PRODUCT FEATURES

NV-P3100-XX 3-ZONE PLAYER (ETHERNET)

FRONT PANEL
1
Item
1
2
3
4
BACK PANEL
1
Item Name
1 Ethernet
2 Speaker Outputs*
3 Line In
4 Trigger In
5 Line Out*
6 Trigger Out
7 USB**
8 Setup
9 AC
* If using a video device as the source for audio output, no perceptible delay in audio occurs when a single player zone is selected. If two or more
player zones are playing the audio from the video source, an audio buffer engages that adds a delay between the audio and video source.
** Not all USB drives are supported natively by the USB port. USB drives should meet USB 2.0 requirements.
Player Portfolio Audio System | Product Manual
Name Description
Standby LED Indicator Indicates if the player is on, in active mode, or in standby mode
Zone 1 LED Indicator Indicates the status of Zone 1
Zone 2 LED Indicator Indicates the status of Zone 2
Zone 3 LED Indicator Indicates the status of Zone 3
3 4
2 5 6 7 8
Description
RJ45 ports for a wired connection to a network router. Use one port for connection
NOTE: It is not recommended to daisy-chain connectors to other devices. Each unit requires an individual
connection to a router or switch.
Speaker connection ports. Each zone represents an independent output
3.5mm stereo analog line-level input port. Each zone represents an independent input
Optional input for a 3-12 volt input trigger (possible use with a future firmware release)
3.5mm stereo analog line-level output port. Each zone represents an independent output
3.5mm output voltage (5 V, 20 mA) trigger for external equipment. Turns on external amp when
audio is present on zone
USB connection port for sharing music content from a storage device. Each zone represents an
independent input
Used for each of the zone sections in the setup process to associate the zone control with the
network
Universal AC power supply connection port
2 3 4
9
5