Keypads - Nuvo NV-P200 Series Product Manual

NUVO
®

3.6 Keypads

The P10 Keypads require a single Cat5 or better cable. They communicate and are powered by 802.11af Power Over Eth-
ernet. Refer to section 2.6 for installation instructions.
General Operation
Control functions are source dependant. For instance, when playing a Pandora station, the keypad allows for skip forward
control but NOT skip backward, as the Pandora service does not allow that function.
Pressing holding Play/Pause will pause all zones. Pressing a second time will resume the zone the keypad is assigned to.
All other zones will remain paused.
Restarting a Keypad
If a keypad needs to be restarted for any reason, pressing and holding the Mute and Volume Down key for three seconds
will restart the keypad. All credentials previously stored will remain.
Resetting a Keypad
If the keypad would ever need to be reset, pressing and holding the Volume Down and Mute for six seconds will reset the
keypad. All credentials previously stored will be erased.
38