Adding A Keypad To The Nuvo Player System - Nuvo NV-P200 Series Product Manual

NUVO

2.6 Adding a Keypad to the Nuvo Player System

Download the Player app to your device from the iTunes App Store or the Google Play Marketplace. Make sure your device
is connected to the same network as the Nuvo Player Port folio System. Open the app and select "Set up my new system"
from the initial screen."Control my system" is used to connect a new iOS or An droid device to an existing system.
Important: The P10 Keypad requires a single Power Over Ethernet (POE) connection and needs to be connected to the
same network, or subnet, of the zone it is intended to control.
Fig. 92
Fig. 94
®
Fig. 93
Fig. 95
Navigate to the Settings menu by pressing the gear icon at
the bottom of the home page. (Fig. 92)
Select "Add a component." (Fig. 93)
Ensure that the keypad is connected to a PoE network port
on the same network or subnet as the zone it is intended to
control. Look for the LEDs to have a breathing motion. If the
LEDs are not breathing, select "The LEDs are not breathing"
at the bottom of the screen. If the LEDs are breathing, select
"Next." (Fig. 94)
Push the VOLUME UP and MUTE keys simultaneously to bind
the keypad to the system. (Fig. 95)
33