Zenith G4 User Manual page 3

IT - Two button tap
A safety lock feature is provided to prevent boiling water flowing if the hot
button is inadvertently pressed. The boiling water taps (except the 2 button
side touch tap) are fitted with a safety lock. For the IT tap, this function can be
activated and deactivated from either the Tap or from the touch screen display
(Located on the unit in the cupboard).
To set the IT tap safety setting:
1.
Press [MENU] button for main
menu.
2.
Press [Setting] button.
3.
Press [Safety] button.
4.
A
Press button - YES / NO
to allow or disallow the safety
setting to be changed on the tap.
Note: The Factory setting is set at YES
To activate the safety (From the IT tap):
After selecting to allow the safety setting from the menu screen (See above).
Place a finger on the safety lock, then
depress the blue button, while keeping
both fingers in position for a period of
approximately ten seconds.The safety lock
indicator light will now be illuminated.
To deactivate the safety
(From the IT tap):
First place a finger on the safety lock, then
press the blue button, while keeping both
fingers in position for a period of approx-
imately ten seconds. The safety lock
indicator light will now extinguish.
To allow the safety setting to be changed
using the touch screen:
1.
Press the [MENU] button for
main menu.
2.
Press the [Setting] button.
3.
Press the [Safety] button.
4.
Press button to allow the
A
safety setting to be changed.
To Enable or Disable the safety on the tap
5. Press button to select Enable / Disable
B
For Hot Isolation
802743NZ - HT G4-BC-IS-IT, User Guide - Aug 2015 - V2.00
Tap Safety
3.
(see page 19)
A
B
C
Safety Lock
A
B
C
Page 3 of 24