Table of Contents
Advertisement
Other Functions
5
"Child Lock"
You can prevent mischief of all the buttons on the control panel by children.
1. Touch "Child Lock" button for 5 seconds(to lock).
Lamp lights on.
● When "Child Lock" is activated, other buttons will not be accepted even if you touch, but Auto Door of the touch
NOTICE
operation is possible.
"Energy Saving"
6
Energy saving function will operate automatically as below conditions.
1. Mode "Energy Saving" ON
Lamp lights on.
● No ECO Monitoring sensor detection.
● No door open
● No control panel operation.
● No Water/Ice Dispenser operation.
7
Door Alarm and ECO Alarm Functions
If the door is left open for more than 1 minute, the alarm system will inform the user by the sound and digital display.
Door Alarm: Informs by
Eco Alarm Display: Indicates the door opening state on the control panel.
To Disactivate Alarm and Sound
1. Keep Touching "Quick Freezing" button for approximately
5 seconds until the sound of "Peep!" is heared.
NOTICE
● Upon shipment, the alarm and sound are set "ON".
● In case of Door Alarm, Eco Alarm Display and each button operation sound was disactivated. If we unplugging and inserting the power plug
or in the event of a power failure the refrigerator will still set the alarm and sound to "OFF".
Peep!
2. Mode "Energy Saving" OFF
Lamp lights off.
● Door open.
● Control panel operation
● Water/Ice Dispenser operation.
Peeppeeppeep
sound.
Lamp lights on.
Pi!
1,2,3,4,5 Seconds
Peep!
Lamp lights off.
2. To stop this function , Touch 5 seconds "Child Lock" again.
Lamp lights off.
NOTICE
● Mode "Energy Saving" ON will operate automatically
as below conditions finished in approximately 24 hours.
● After a long time operation of "Energy Saving" ON,
in some cases, fatty ice cream ,etc., may become soft.
● In case the compartment temperature rises up,
the operation will be back to a normal setting temporarily.
CAUTION
● If "Energy Saving" operation is working in high
humidity environment, dew may appear on refrigerator
surface.
To re-activate Alarm and Sound
1. Keep Touching "Quick Freezing" button for approximately
5 seconds until the sound of "Pipi!" is heared.
1,2,3,4,5 Seconds
Pipi!
Lamp lights on.
. . . .
Pipi!
Lamp lights off.
9
11
Advertisement
Table of Contents
