Table of Contents
Advertisement
4.
Troubleshooting
If there is an installation problem and I don't get my
original installer to come back to fix it, who pays?
You do. Service organisations will charge for their call-outs if
they are correcting work carried out by your original installer.
Therefore, it's in your own interest to keep track of this
installer so that you can contact them as required.
Hotplate ignition or hotplate burners faulty
Is the power on? If not, there maybe something wrong with
the power supply.
Are the sparker (ignition electrode) or burner slots blocked by
debris?
Are the burner trim and caps correctly located? See the
section on 'Cleaning' .
Hotplate burners will not light
Make sure that the burner parts have been replaced correctly
after wiping or removing for cleaning.
Check that there is not a problem with your gas supply. You
can do this by making sure that other gas appliances you may
have are working.
Do the burners spark when you turn on the control? If not,
check that the power is on.
7
Advertisement
Table of Contents
