10
|
Configuration
Overview field settings
Export MMI settings
Bizone kit
Installer reference guide
218
Almost all settings can be done using the menu structure. If for any reason it is
required to change a setting using the overview settings, then the overview
settings can be accessed in the field settings overview [9.I]. See
4
overview
setting" [
136].
About exporting the configuration settings
Export the configuration settings of the unit to a USB memory stick, via the MMI
(the user interface of the indoor unit). When troubleshooting, these settings can
be provided to our Service department.
#
Code
[9.N]
N/A
To export MMI settings
1 Open the user interface panel and insert a USB memory stick.
2 On the user interface, go to [9.N] Export MMI settings.
3 Select OK.
4 Remove the USB memory stick and close the user interface
panel.
Bizone kit installed
#
Code
[9.P.1]
[E-0B]
Description
Your MMI settings will be exported
to the connected storage device:
▪
Back
▪
OK
Description
Bizone kit installed:
▪
0 No : The system only has a main zone.
▪
1 N/A
▪
2 Yes: A bizone kit is installed in order to add
an additional temperature zone.
EPRA08~12EAV3+W1 + ETVH12SU18+23EA6V
"To modify an
—
—
Daikin Altherma 3 H MT F
4P644482-1 – 2021.03