Enabling Password Protection - Epson PowerLite 78 User Manual

caution
If you lose the remote
control, you will not be able
to enter the password. Keep
the remote control in a safe
place at all times. Also, it's a
good idea to write down
your password.
Fine-Tuning the Projector
68
Disable the projector's buttons; this is useful, for example, in a
■
classroom when you want to ensure that no one touches the
projector's buttons while you're using the remote control. See
page 72.
Secure the projector to prevent theft using a cable locking system.
■
See page 72.

Enabling Password Protection

The default setting for the password is
create a new password:
1. Press the button on the remote control for five to seven
Freeze
seconds. You see this screen:
2. Select the type(s) of password protection you want to use:
■
Power On Protect
projector. After the projector is plugged in and turned on,
you must enter a password to use the projector. Select
press , then press
Enter
screen.
■ User's Logo Protect
page 70), display, and User's Logo settings in the Extended
menu from being changed. Select
to return to the Password Protect screen.
Esc
3. Use the arrow buttons to select
4. When you see a message asking if you want to change the
password, select
Yes
5. Do one of the following to enter your password:
. Follow these steps to
0000
: Prevents unauthorized use of the
to return to the Password Protect
Esc
: Prevents your custom screen (see
, press
On
and press
Password
and press .
Enter
,
On
, then press
Enter
.
Enter