Advanced Setting Menu - SmartVent Positive2 User Manual

Advanced Settings

Advanced Setting Menu

SETTING DESCRIPTION
000 Touch Screen Controller - Firmware Version
001 Ceiling Controller - Hardware Version
002 Ceiling Controller - Firmware Version
003 Ceiling Controller - Macro Version
004 Recycle Temperature - Maximum
005 Recycle Temperature - Minimum
006 Temperature Set - Threshold
007 Temperature Set - Differential
008 Heat Transfer Speed - High
009 Heat Transfer Speed - Medium
010 Filter Used Percentage
011 Temperature - Roof Cavity
012 Temperature - Room
013 Screen Brightness - Maximum
014 Screen Brightness - Minimum
015 Boost Time
016 Filter Reset
1. If RECYCLE is enabled and the roof cavity sensor reading goes above the maximum recyle temperature setting or goes below the minimum recycle
temperature setting, then recycle mode will activate.
2. If your roof cavity or room temperature readings are inaccurate, use these settings to calibrate them.
3. To reset the filter change 016 setting value to 10 and press SELECT
14
RANGE
N/A
N/A
N/A
N/A
20°C - 50°C
0°C - 20°C
0°C - 5°C
0°C - 20°C
0°C - 15°C
0°C - 15°C
0 – 100%
-5°C - 5°C
-5°C - 5°C
0-100%
0-100%
0 min – 60 min
0 - 100
.
DEFAULT NOTE
N/A
N/A
N/A
N/A
30°C 1
5°C 1
1°C
5°C
5°C
2°C
0%
0°C 2
-0.5°C 2
80%
10%
20 min
0 3