Lenovo ThinkStation P520 Hardware Maintenance Manual page 122

b. Lift the tab 1 of the metal bracket and push the metal bracket with force as shown. Then slide the
bracket and remove it from the plastic frame.
Figure 27. Removing the metal bracket from the plastic frame of the converter
c. Carefully flex both sides of the metal bracket to remove the storage drive from the bracket.
Figure 28. Removing the storage drive from the metal bracket
5. To install a new 2.5-inch storage drive into the front-access storage enclosure, do the following:
a. Carefully flex both sides of the metal bracket and align the four tabs
corresponding holes in the new storage drive.
Note: Ensure that the connectors of the storage drive face toward the tab of the metal bracket.
Figure 29. Installing the 2.5-inch storage drive into the metal bracket
114
P520 Hardware Maintenance Manual
1 on the metal bracket with the