Ipv6 - Pppoe - D-Link Exo AX DIR-X5460 User Manual

Section 3 - Configuration
Select PPPoE if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the
Internet. Click Save at any time to save the changes you have made on this page.
PPPoE Session
Create a new PPPoE session.
Username
Enter the username provided by your ISP.
Password
Enter the password provided by your ISP.
Address Mode Select either Dynamic IP or Static IP.
IP Address
Configurable if Static IP is chosen. Enter the IP address
provided by your ISP.
Service Name Enter the ISP service name (optional).
Reconnect Mode Select either Always On or Manual.
MTU Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your ISP.
D-Link DIR-X5460 User Manual

IPv6 - PPPoE

48