Health O Meter 2650KL User Instructions page 17

SETUP / BATTERIES / TRANSPORT (CONTINUED)
Preparing a 2650KL / 2700KL Scale for Transport
These scales can be easily folded for movement from one room to another. Both scales include
mounting pins to secure the display assembly during transport (the pins are located on the right
wheelchair ramp). To prepare the scale for transport, follow these steps:
1. Remove the display assembly from the wall by lifting up the assembly off of the mounting
screws.
2. Unplug the AC adapter from the display assembly, and remove the adapter from the outlet.
Carefully store the AC adapter and cord to prevent damage during transport.
3. With the scale on the floor, fold both ramps onto the platform.
4. Position the display assembly onto the mounting pins, located on the right folded ramp. The
display assembly is mounted onto the ramp by sliding the display assembly brackets onto the
raised pins (see Figures 8 & 9).
5. For the 2650KL, grasp the guardrail, located on the opposite side the wheels, and lift the
scale onto the two wheels. The scale can now be transported by rolling the unit on its wheels.
6. For the 2700KL, grasp the handle, located on the opposite side of the wheels, and lift the
scale onto the two wheels. The scale can now be transported by rolling the unit on its wheels.
Mounting pins
on right folded
ramp
Figure 8
Figure 9
17