dbx DriveRack Studio User Manual page 15

DriveRack
The features of the front panel of the DriveRack Studio are as follows from left to right.
RTA MIC Input- This XLR input is used for the connection of a RTA microphone. The
RTA MIC input button is used to engage the RTA input connector.
operational information of the DriveRack Studio is displayed here. The display will also
notify the user if any internal clipping is taking place within the unit. The following
message will appear: CLIP. Data Wheel - The data wheel is used to scroll through the
program menu of the DriveRack Studio. The Data Wheel is also used to perform editing
functions to effects and utility menu features. Button Array - Operational editing is
done using this 12 button array. A complete description of each button's functionality is
listed below. Input meters- These two 6-segment LED meters monitor the input level
of the DriveRack Studio directly after the input mixer. Output meters - These six 6-
segment meters monitor the output levels of the DriveRack Studio directly after the out-
put gain stage. Threshold meters - These six 1-segment meters (when lit) show that
threshold level of the limiters has been exceeded.
DriveRack Studio Wizard
Now that you have made all of your audio connections and have made yourself familiar with
the front-panel navigation of the unit, you can easily optimize your system through the use of
the DriveRack Studio Wizard setup system. This feature of the DriveRack Studio allows for
quick and hyper-accurate venue setups. The menu section of the Wizard offers System setup,
Auto EQ and AFS (Advanced Feedback Suppression). The following will walk you through
your venue setup.
• From program mode, press the <WIZARD> button and the display will appear as
follows:
System Setup
• The arrow will indicate the selected Wizard setup. To select any one of the three
options, rotate the <DATA> wheel. If you are performing the System setup, press
either the <NEXT PG> button or the <DATA> wheel and the display will appear as
follows:
• Simply rotate the <DATA> wheel to select either a Mono or Stereo input configura
®
®
Studio
DriveRack PA WIZARD
System Setup
Auto EQ WIZARD
AFS WIZARD
Input Setup
Select Input as MONO
or STEREO.
>STEREO
Getting Started
LCD Display- All
DriveRack Studio User Manual
Section 1
5