Table of Contents
Advertisement
Quick Links
Instruction manual
3-Port USB 3.0 Hub Plus Gigabit Ethernet
ST3300G3UA
FR: Guide de l'utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l'uso - it.startech.com
Packaging contents
• 1 x 3-port USB 3.0 hub plus Gigabit Ethernet
• 1 x instruction manual
System requirements
• Host computer with a USB 2.0 or USB 3.0 port
• Any of the following operating systems:
• Windows® 10 (32-bit or 64-bit)
• Windows 8.1 (32-bit or 64-bit)
• Windows 8 (32-bit or 64-bit)
• Windows 7 (32-bit or 64-bit)
• Windows Server® 2008 R2
• Windows Server 2012
• Mac OS 10.7 and later (tested up to 10.11)
Note: To obtain the maximum USB throughout, you must use a
computer with a USB 3.0 port.
Operating system requirements are subject to change. For the latest
requirements, please visit www.startech.com/ST3300G3UA.
Product diagram
USB 3.0 ports
Gigabit RJ45 port
For the latest information, technical specifications, and support for
this product, please visit www.startech.com/ST3300G3UA.
USB 3.0 cable
*actual product may vary from photos
Power LED
USB 3.0 cable
Introduction
The ST3300G3UA is a sleek and stylish USB 3.0 hub and Gigabit
Ethernet adapter that is portable and lightweight. It's equipped
with three USB 3.0 ports with throughput up to 5Gbps and is also
backward compatible, so you can use it with your USB 2.0 and earlier
devices.
About USB 3.0 and USB 3.1 Gen 1
USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard
offers speeds up to 5Gbps.
Connect the hub to a computer
1. Connect the USB 3.0 cable on the hub to a USB port on the host
computer.
Note: For the best performance, use a computer with a USB 3.0 port.
2. Connect your Cat 5e/6 network connection to the Gigabit RJ45
port on the hub.
3. Connect up to three USB 3.0 peripherals to the hub as necessary.
Confirm driver installation
Depending on the version of the operating system that you're
running, when you connect the hub to your computer, the drivers
are installed automatically.
To make sure that the drivers installed properly, on a computer
running a version of Windows, do the following:
1. On your computer, navigate to Device Manager.
2. Under Network adapters, check to make sure that there isn't an
exclamation mark next to any of the adapters.
If there is an exclamation mark next to the Realtek USB device, see
the Install a driver topic for more information.
Link and activity LED
Gigabit RJ45 port
Manual Revision: 10/22/2015
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for StarTech.com ST3300G3UA
Summary of Contents for StarTech.com ST3300G3UA
- Page 1 • Host computer with a USB 2.0 or USB 3.0 port • Any of the following operating systems: The ST3300G3UA is a sleek and stylish USB 3.0 hub and Gigabit • Windows® 10 (32-bit or 64-bit) Ethernet adapter that is portable and lightweight. It’s equipped •...
- Page 2 This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question.
Need help?
Do you have a question about the ST3300G3UA and is the answer not in the manual?
Questions and answers