LampSite
Site Maintenance Guide
Step 18 Assemble the installation support, and use the M4 Phillips screwdriver to tighten the four
fastening screws to 2 N•m, as shown in
Figure 10-15 Assembling the installation support
Step 19 Neatly insert four rubber plugs into the holes of the installation support, as shown in
10-16.
Figure 10-16 Assembling the installation support
Step 20 Connect all the cables to the pRRU according to the recorded installations.
Step 21 Optional: Insert the rubber plug into the Ethernet port, as shown in
Issue 02 (2014-05-27)
NOTE
The Phillips screw is the one removed and kept in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Replacing the pDock Mother Board
Step
9.
Figure
10-15.
Figure
Figure
10-17.
43