Huawei Lampsite RHUB3908 Maintenance Manual page 26

LampSite
Site Maintenance Guide
----End
Issue 02 (2014-05-27)
Figure 6-2 Removing the mounting ear
5. Install the new RHUB on a wall. For details, see LampSite Installation Guide.
NOTICE
Take proper ESD protection measures, such as wearing an ESD wrist strap or ESD
gloves to prevent electrostatic damage to the boards, modules, or electronic
components.
6. Connect all the cables to the new RHUB according to the recorded installations.
7. Power on the RHUB by referring to
8. Determine whether the new RHUB is working properly according to the indicator
status on the RHUB. For details about the indicator status, see RHUB Ports and
Indicators in LampSite Hardware Description.
9. Instruct the network operator to run the RST BRD command to reset the RHUB. No
further action is required.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4.1 Powering On the RHUB.
6 Replacing the RHUB
18