Huawei Lampsite RHUB3908 Maintenance Manual page 44

LampSite
Site Maintenance Guide
Step 4 Record connection positions of all pRRU cables, and then remove the cables.
Step 5 Removing the pRRU. Hold the pRRU case in one hand and pull the hoist clamp on the mounting
bracket with the other hand, as shown in step a in
bracket from the pRRU, as shown in step b in
Figure 10-1 Removing the pRRU
Step 6 Optional: Remove the rubber plug from the Ethernet port, as shown in
Figure 10-2 Removing the rubber plug from the Ethernet port
Step 7 Remove the four rubber plugs from holes of the installation support, as shown in
Issue 02 (2014-05-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Replacing the pDock Mother Board
Figure 10-1. Then, remove the mounting
Figure 10-1.
Figure 10-2.
Figure 10-3.
36