Huawei Lampsite RHUB3908 Maintenance Manual page 47

LampSite
Site Maintenance Guide
1.
2.
Issue 02 (2014-05-27)
Use an M4 Phillips screwdriver to loosen the Phillips screws on the RF daughter board, as
shown in Figure 10-7.
Figure 10-7 Removing Phillips screws
Hold the RF daughter board with one hand and pull its handle with another hand to remove
the board, and place the board in an ESD bag, as shown in
Figure 10-8 Removing the RF daughter board in slot1 and slot2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Replacing the pDock Mother Board
Figure 10-8.
39