Huawei Lampsite RHUB3908 Maintenance Manual page 49

LampSite
Site Maintenance Guide
Figure 10-11 Installing a new pDock mother board
Step 15 Install the light pipe, and use the M3 Phillips screwdriver to tighten the two fastening screws to
0.8 N•m, as shown in
Figure 10-12 Installing the light pipe
Step 16 Install the RF daughter boards in slots S1 and S2, and use the M4 Phillips screwdriver to tighten
the two fastening screws always carried on each daughter board to 1.4 N•m, as shown in
10-13.
Issue 02 (2014-05-27)
Figure 10-12.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Replacing the pDock Mother Board
Figure
41