Changing Confirmation Ids - Siemens Reyrolle 7SR5 Operating Manual

[sc_7SR5_LanguageSettings, 1, --_--]
Figure 6-8
The language of the text displayed on the device LCD can also be changed using Reydisp Manager 2 from the
Configuration > Device menu.
The setting is accepted in the device through sending the device configuration into the device.
[sc_7SR5_LanguageSettingsReydisp, 1, --_--]
Figure 6-9
6.5.7

Changing Confirmation IDs

Confirmation IDs are used for protection against unintentional and unauthorized operation. If a confirmation
ID is activated, you must enter it before the relevant action is enabled by the 7SR5 device. For this purpose,
the confirmation ID is transmitted in an encrypted way to the 7SR5 device, where it is checked.
Authorization for security-relevant operations on the device directly via the fascia or Reydisp Manager 2 is
assured by the assignment of confirmation IDs. These confirmation IDs are assigned exclusively using Reydisp
Manager 2. You can find more information in the Security Manual.
To reach the menu for the confirmation IDs of your 7SR5 device, open Configuration > User Settings >
Device settings in Reydisp Manager 2.
The confirmation IDs for 3 different access types will appear in this window.
Not Set means no confirmation IDs are parametrized for this function.
**** means a confirmation ID is already parametrized for this function.
Reyrolle 7SR5, Operating, Manual
C53000-B7040-C013-1, Edition 05.2021
Language Settings via the Front Fascia
Language Settings via Reydisp Manager 2
Commissioning
6.5 Device Configuration
91