What To Do If - Miele Novotronic W 930i Operating Instructions Manual

Repair work to electrical appliances should only be carried out by a suitably
qualified person in accordance with local and national regulations. Unauth-
orised repairs could be dangerous.

What to do if, . . .

. . . The programme does
not begin?
. . . The "Check water inlet /
outlet" LED's are flashing?
All manuals and user guides at all-guides.com
Cause . . .
There is no power.
The "ON" LED has not lit up.
There is power and the "ON"
LED is lit up, but the
proramme selector has not
been turned to the "Finish /
Start" position.
The water inlet is blocked.
The "Check water inlet" LED is
flashing, but the programme
has run normally?
The water inlet system is
blocked.
The "Check water inlet" LED is
flashing and the "Finish" light
is on in the Sequence display
but the load in the machine
has not been washed.
The water outlet is blocked.
The "Check water outlet" LED
is flashing.
The Waterproof system has
reacted.
The "Check water inlet / outlet
LEDs" are flashing.
What to do if . . . ?
Remedy . . .
Check that..:
– the door is properly closed.
– the mains plug is plugged in.
– the fuse or circuit breaker
has not tripped.
– Turn the programme
selector to the "Finish /
Start" position.
– Select a programme.
– The stopcock is not opened
far enough.
– The inlet hose is kinked.
– The water pressure is too
low. Call the Service Dept.
– Turn the programme
selector to the "Finish /
Start" position.
– Open the stopcock.
– Select a programme.
– Clean the drain pump and
fluff filter.
– Has the drain pump been
fixed too high? (max drain
head 1 metre).
– Call the Service Dept.
27