Problem Solving Guide; What To Do If; The Programme Does Not Start - Miele W 5903 WPS Operating Instructions Manual

Problem solving guide

What to do if . . .

With the aid of the following guide, minor problems can be easily corrected
without contacting Miele. Please note that a call-out charge will be applied for
unnecessary service visits where the problem could have been rectified as
described in these Operating instructions.
Please note:
,
Repair work to electrical appliances must only be carried out by a suitably
qualified and competent person in strict accordance with current local and
national safety regulations. Repairs and other work by unqualified persons
could be dangerous. The manufacturer cannot be held liable for unauthorised
work.

The programme does not start

Problem
The display remains
dark and the indicator
lights for the
programme buttons
are not lit up.
You are asked to enter
a code.
The display is dark.
42
Possible cause
There is no power to
the machine.
Access via a code has
been activated.
The display has
switched off
automatically to save
energy (Standby
mode).
Remedy
Check whether
– the mains plug is plugged
in and switched on.
– the fuse or circuit breaker
has tripped.
Enter the code and confirm
the entry. Deactivate the code
if you do not wish this
message to appear in the
display the next time the
machine is switched on.
Press any button. Standby
comes to an end.