Miele Novotronic W 930i Operating Instructions Manual page 19

QUICK WASH
40°C
–
–
X
–
–
2
2
–
max. 500
max. 1600
max. 30 mins
optional
optional
normal
2)
low
medium
Final spin:
The maximum spin speed according to the programme is held constant for a fixed period of time.
In the programmes MINIMUM IRON, WOOL and SEPARATE RINSE the spin speed is automat-
ically limited to 900 rpm and in the DELICATES programme to 600 rpm, even if the selector has
been set to a higher spin speed. A lower speed can be selected.
Anti-crease, spin and loosen:
The anti-crease action guards against the tendency for creases to set in when fabrics have been
left in water for a long time. There is drum movement twice a minute. The anti-crease phase can
be cancelled by pressing in the "Door" button.
Rinse hold:
Interim rinse and spin is carried out in the relevant programmes.
At the end of the final rinse the washing remains suspended in water, if the spin speed selector is
set to "Rinse hold".
This helps to reduce the possibility of creasing, if the washing is left for some time before being
taken out of the machine.
Without final spin:
Interim rinse and spin is carried out in the relevant programmes.
Washing is not spun after the final rinse, but the water is drained away, and the machine goes
straight into the anti-crease stage.
All manuals and user guides at all-guides.com
WOOL Starch
–
–
X
–
–
3
3
–
–
max. 900 max. 1600
– max. 30 mins
optional optional
optional optional
Wool normal
medium
high
Programme sequence
Spin
– –
–
X
– –
– –
– –
– –
– –
– –
– –
max. 1600
max. 30 mins
–
–
–
low –
– –
SEPARATE
RINSE
–
–
–
–
–
2
–
–
–
max. 900
–
optional
optional
–
high
19