Problem Solving Guide; What To Do If; The Programme Does Not Start - Miele PW 6080 Vario Operating And Installation Instructions

What to do if . . .

With the help of the following notes, minor faults in the performance of this
machine, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
You should, however, note the following:
,
Repair work to electrical appliances should only be carried out by a Miele
Service Technician in strict accordance with current local and national safety
regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.

The programme does not start

Problem
The display remains
dark.
The programme does
not start when Spin has
been selected.
The display is dark and
the Start button is
flashing slowly.
Possible cause
There is no power to
the machine.
The machine has not
been prepared for
using for the first
time.
The display has
switched off
automatically to save
energy (Standby
mode).

Problem solving guide

Remedy
Check whether
– the electricity supply to the
machine is switched on.
– the fuse or circuit breaker
has tripped.
Run the Cottons Universal
60°C programme as
described "Commissioning the
machine" in the separate
booklet "Commissioning,
Programme chart and
Settings" supplied with the
machine.
Press one of the short cut
buttons. The machine comes
out of standby mode.
41