Fine-tuning the Projector
54
Using the Projector's Menu System
The projector menus let you adjust and customize the projector
features:
The
menu lets you modify the colors of the projected
■
Image
image and fine-tune brightness, contrast, and sharpness. See
page 56.
■
The
menu lets you make adjustments to the input signal.
Signal
You can select your input source, change the image position and
aspect ratio, and adjust tracking and sync for computer images.
See page 58.
The
menu lets you customize the way you use the
■
Settings
projector. It allows you to adjust the volume and keystone
correction, set lamp brightness to high or low, control use of the
remote control receivers, project a test pattern for adjustments,
and disable buttons on the projector while you are projecting. See
page 60.
The
menu lets you customize the way you set up the
■
Extended
projector. Among the options, you can select the menu language,
set rear or ceiling projection, and record a custom image or logo
to be displayed as the startup screen or whenever you press the
button on the remote control. See page 62 and
A/V Mute
page 66.
The
menu lets you select your network settings and
■
Network
optional passwords for monitoring the projector over a network
or over the web. See page 64.
The
menu provides information about lamp status, and
■
Info
computer or video settings. See page 64.
The
menu lets you restore the projector's factory default
■
Reset
settings. See page 72.