Adjusting Signal Settings
Although the projector normally detects and optimizes the input
signal automatically, you can use the Signal menu to make manual
adjustments. In addition to changing the position of the projected
image, you can correct tracking and sync for computer images, or
change the aspect ratio.
1. Press the
button and select the
Menu
screen similar to one of those below. (The settings will be different
depending on the source you are projecting from.)
Computer/RGB video
Composite video/S-Video
menu. You see a
Signal
Component video
HDMI (PowerLite 1220/
PowerLite 1260 only)
Fine-Tuning the Projector
69