Restoring The Default Settings; Adjusting The Image - Epson PowerLite 1220 User Manual

Restoring the Default Settings

You can use the
Reset
factory-default settings for the settings in that menu.
To restore all the projector settings to their factory-default values,
select the menu, highlight
Reset
to confirm.
Yes

Adjusting the Image

You can use the Image menu to adjust the brightness, sharpness, color,
tint, contrast, and
Auto Iris
1. Press the button on the projector or remote control and
Menu
select the menu. You see a screen similar to one of these:
Image
Computer/USB display/ RGB video/
*
USB
* PowerLite 1220/PowerLite 1260 only
option on any menu to restore the
, press
Reset All
settings.
Component video/ Composite video/
S-Video
, and select
Enter
Fine-Tuning the Projector
note
When you select
Reset All
in the Reset menu, it does
not reset the Input Signal,
User's Logo, Language, or
Lamp Hours settings.
note
If you are using the HDMI
port (PowerLite 1220/
PowerLite 1260 only), you
see the menu on the left if
the signal is digital RGB
video, or the menu on the
right if the signal is
component video.
67