Caring For Moviemate; Cleaning The Lens; Cleaning Moviemate's Case - Epson MovieMate 25 User Manual

Caring for MovieMate

MovieMate 25 needs little maintenance. All you need to do on a regular basis is keep the lens
clean. You also need to clean the air filter periodically to prevent overheating.
Warning: Before you clean any part of MovieMate, turn it off and unplug the power cord. Never
open any part of MovieMate, except as described in this User's Guide. Dangerous electrical
voltages in the projector can injure you severely. Do not try to service this product yourself, except
as specifically explained in this User's Guide.
The only parts you should replace are the lamp and air filter. If another part needs replacing,
contact Epson or a qualified servicer (see page 52).
Follow the instructions in this section to clean the lens and case, clean and replace the air
filter, replace the lamp, and store or transport MovieMate.

Cleaning the Lens

Clean the lens whenever you notice dirt or dust on the surface.
■
Use a canister of compressed air to remove dust.
■
To remove dirt or smears, use lens-cleaning paper. If necessary, moisten a soft cloth with
lens cleaner and gently wipe the lens surface.
Caution: Never rub the lens with abrasive materials.

Cleaning MovieMate's Case

Before you clean the case, turn off MovieMate and unplug the power cord.
■
To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth.
■
To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral
detergent. Wring the cloth as dry as possible, then wipe the case.
Caution: Never use wax, alcohol, benzene, thinner, or other chemical detergents. These can
damage the case. Never spray cleaners directly on MovieMate.
Caring for MovieMate
39