Viewing And Adjusting Video Information - Epson MovieMate 25 User Manual

You can adjust the following items for various viewing conditions and individual videos:
■ Brightness
■ Contrast
■ Color Saturation
■ Tint
■ Sharpness
■ Keystone:
by tilting MovieMate up or down, as shown.
3. Press
The settings are saved, even after you turn MovieMate off.

Viewing and Adjusting Video Information

You can use the
lamp has been used, and to reset the timer after you install a new lamp. You can also adjust
the video signal setting and select high altitude mode if necessary.
1. Press the
Note: If the lamp has been used less than 11 hours, 0H is displayed.
2. To adjust the video signal, reset the lamp hours, or select high altitude mode, continue
pressing the
following items:
■ Video Signal:
other problems, select the appropriate signal for your equipment. For most purposes,
leave this setting on
■ High Altitude Mode:
select
■ Lamp-Hours Reset:
3. Press
34
Doing More with MovieMate
(only works on NTSC signals)
Corrects the distorted image shape caused
or to increase or decrease the setting.
. button on the remote control to view the number of hours the
Visual Info
button on the remote control. You see the following on the screen:
button until you see the item you want to set. You can adjust the
If you are using external video equipment and you see interference or
Auto.
If you are using MovieMate at an altitude above 4,900 feet,
ON.
After you replace the lamp, select
or to change the setting.
to reset the lamp timer.
Yes