Adjust The Image - Epson EX90 Quick Setup Manual

5

Adjust the image

1
To raise the image, stand behind the
projector, then press the foot release lever
and lift the front of the projector. Release
the lever to lock the foot in the position
you want.
2
Rotate the focus ring to sharpen the image,
and the zoom ring to reduce or enlarge the
image.
3
If your image looks like
is facing the screen squarely. Then, if necessary, press the
buttons on the projector's control panel until the image is corrected.
4
To select the best color mode, press the
Color Mode button on the remote control
repeatedly to move through the options.
See your User's Guide on the CD-ROM for more information about
image adjustments.
6
Install your User's Guide
and register your projector
1
Insert the EX90 CD-ROM in your drive. If the installer doesn't open
automatically, double-click the Epson CD-ROM icon, then double-click
the Epson installer icon.
2
Select English.
3
Follow the instructions on the screen to register.
You can also register at www.epson.com/webreg.
NOTE
4
After you register the projector, click User's Guide to install it.
(If you don't already have Adobe
follow the on-screen instructions to install it.)
5
When you're done, click Exit.
To open your User's Guide, double-click the EX90 User's Guide icon on your
desktop.
or , first make sure the projector
, click Adobe Reader and
Reader
® ®
Zoom ring
Focus ring
and
Color Mode
button