Connection Of Drain Hoses - Euromaid E14DWX User Manual

Connection Of Drain Hoses

Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it
run into the sink, making sure to avoid bending or crimping it. The height of drain
pipe must be less than 1000mm. The free end of the hose must not be immersed in
water to avoid the back flow of it.
Please securely fix the drain hose in either position A or position B
Back of dishwasher
Mains Cable
How to drain excess water from hoses
If the sink is 1000mm higher from the floor, the excess water in hoses cannot be
drained directly into the sink. It will be necessary to drain excess water from hoses into
a bowl or suitable container that is held outside and lower than the sink.
Water outlet
Connect the water drain hose. The drain hose must be correctly fitted to avoid water
leaks. Ensure that the water drain hose is not kinked or squashed.
NOTE: When connected to a spigot (A), ensure the spigot is fully drilled out to avoid
blockages.
Extension hose
If you need a drain hose extension, make sure to use a similar drain hose.
It must be no longer than 4 meters; otherwise the cleaning effect of the dishwasher
could be reduced.
Syphon connection
The waste connection must be at a height less than 1000mm (maximum) from the
bottom of the dish. The water drain hose should be fixed .
Drain hose
Water Inlet
Drain Pipe
10
A
B
Counter