Uniden BW5151R Series Owner's Manual page 19

Reset
This option allows you to restore your system to factory setting. The monitor will
reboot and all menu settings, WILL be affected by the reset.
1. Press the MENU button on the monitor, and select
2. Press OK to reset the monitor.
3. Press LEFT and RIGHT direction buttons to change options between Yes or No
and then press OK to proceed with the selection.
# All menu settings, except Camera Pairing, WILL be affected by a reset.
Cameras will remain paired with the monitor.
Device Information
1. View the monitor and camera firmware version.
2. Press the MENU button on the monitor, and select
3. Press LEFT and RIGHT direction buttons to toggle between the monitor and
camera firmware information.
> Reset.
> Device Information.
19