Advent ADV10A Operation Manual page 14

SOURCE DEFAULT DVD
This allows the user to set the system default source to DVD.
Notes:
•
If source default is set to ON, every time the unit is turned off then on, the unit will power up and automatically switch the source to DVD. If
source default is set to OFF and the unit is turned off then on, the unit will power up in whatever source was last selected.
•
The unit is set to source default DVD on as the default mode of operation.
• Selection of Source default can only be made from within the system menu.
SCREEN MODE SELECT
This allows the user to change the screen format (aspect ratio 4:3, 16:9).
To select the screen aspect ratio format:
1. Highlight SCREEN MODE and press the ENTER button to access the submenu.
p
2. Press the Cursor button or
3. Press the ENTER button to confirm the setting.
SYSTEM MENU
PICTURE CONTROL
FMM
OSD LANGUAGE
SOURCE DEFAULT DVD
SCREEN MODE
q
to select 4:3 or 16:9.
SYSTEM MENU
PICTURE CONTROL
FMM
OSD LANGUAGE
SOURCE DEFAULT DVD
SCREEN MODE
SOURCE DEFAULT DVD
ON
OFF
SCREEN MODE
4:3
16:9
14