Display Functions - Miele PFD 104 SCVi Operating Instructions Manual

Display functions

The display is used to select or set the
following:
- the programme
- the timer
- the Settings 
The display can show the following:
- the programme stage
- the estimated time left for the
programme to run
- the water consumption
(EcoFeedback)
- any relevant fault messages and
information
To save energy, the dishwasher
switches off after a few minutes if you
do not touch any sensors during this
time.
Touch the  sensor to switch the
dishwasher back on.
Guide to the appliance
The OK sensor is used to confirm a
message or setting and also to move to
the next menu or another level.
Under  Further programmes/Settings
a scroll bar  will appear in the right of
the display. This offers further options.
These options can be viewed using the
 sensors.
You can alter the dishwasher's controls
to suit changing requirements in the
Settings menu (see "Settings").
The option that is selected will have a
tick  next to it.
To exit a submenu use the
 Back sensor.
If you do not press any sensors for
several seconds, the display will revert
to the previous menu. You will then
have to enter your settings again.
9