Miele PFD 104 SCVi Operating Instructions Manual page 14

Warning and Safety instructions

The dishwasher may only be operated if the door opening
mechanism (depending on model) is working correctly, as otherwise
there could be a danger when the automatic door opening is
activated.
The maximum weight of the front panel that can be aligned with the
factory fitted door springs is 10–12 kg (depending on model).
To check that the door opening mechanism is working correctly:
- The door springs must be evenly adjusted on both sides. They are
correctly adjusted when the door remains stationary when left half
open (approx. 45° opening angle). The door must not fall open on
its own beyond this point.
- The door locking pin retracts automatically after the drying phase
when the door is opened.

There must be no electrical sockets behind the dishwasher. There
is a danger of overheating and risk of fire if the dishwasher were to
be pushed up against a plug. See "Electrical connection".

Do not connect the dishwasher to the mains electricity supply by
a multi-socket unit or an extension lead. These do not guarantee the
required safety of the appliance (e.g. danger of overheating).

Never open the casing of the appliance. Tampering with electrical
connections or components and mechanical parts is highly
dangerous to the user and can cause operational faults.

The dishwasher must not be used if the electrical connection
cable is damaged. A damaged connection cable may only be
replaced by a suitable connection cable of the same type. For safety
reasons, such replacement may only be carried out by Miele
Professional Service or a Miele authorised technician.

This dishwasher must be disconnected from the mains electricity
supply before any maintenance or repair work is carried out.

The plastic housing of the water connection contains two
electrical components. It must not be dipped in water.
14