Miele@Home - Miele PFD 104 SCVi Operating Instructions Manual

Finally, prompts will appear in the
display.
After confirming these prompts with
OK, the messages 
 may appear.
Refill rinse aid
 Add salt and rinse aid if necessary
(see "Using for the first time -
Dishwasher salt" and "Rinse aid").
 Select OK to confirm the messages.
When a programme is selected, it will
appear briefly in the display and the
appropriate sensor will be illuminated.
Next, the estimated energy and water
consumption may be shown for the
selected programme for several
seconds.
Finally, the display will show the
estimated programme duration for the
programme selected.
Refill salt and
Commissioning

Miele@home

Your dishwasher is equipped with an
integrated Wi-Fi module.
To use this feature, you will need:
- a Wi-Fi network
- a network solution from Miele, e.g.
Miele@mobile App
- a Miele user account You can create
a user account using the network
solutions from Miele, .e.g via the
Miele@mobile App.
The relevant network solution will guide
you as you connect your dishwasher to
your home Wi-Fi network.
Once your dishwasher is connected to
your Wi-Fi network, you can use the
network solution to carry out the
following tasks:
- Call up information on the operating
status of your dishwasher
- Call up information on the
programme sequence of your
dishwasher
Connecting the dishwasher to your Wi-
Fi network will increase energy
consumption, even when the
dishwasher is switched off.
Make sure that your Wi-Fi network
signal strength is strong enough at
the installation site of your
dishwasher.
23