Epson L3210 Series User Manual page 116

Solving Problems
The paper path is dirty.
Solutions
Load and eject paper without printing to clean the paper path.
"Cleaning the Paper Path for Ink Smears" on page 68
&
There is dust or dirt on the originals or the scanner glass.
Solutions
Remove any dust or dirt that adheres to the originals, and clean the scanner glass.
"Cleaning the Scanner Glass" on page 68
&
The original was pressed with too much force.
Solutions
If you press with too much force, blurring, smudges, and spots may occur.
Do not press with too much force on the original or the document cover.
"Placing Originals on the Scanner Glass" on page 28
&
Moiré (Cross-Hatch) Patterns Appear in the Copied Image
If the original is a printed document such as a magazine or a catalog, a dotted moiré pattern
appears.
Solutions
Change the reduce and enlarge setting. If a moiré pattern still appears, place the original at a slightly
different angle.
An Image of the Reverse Side of the Original Appears in the Copied Image
The following causes can be considered.
>
Printing, Copying, and Scanning Quality is Poor
>
Copy Quality is Poor
116