Using The Timer - TEFAL ActiCook User Manual

Using the timer

The timer has been designed to help you guarantee the cooking result by
allowing you to optimise energy consumption.
This image flashes at the start of use and recommends that
you begin cooking with the heat source at full power.
Once the cooking time countdown has begun, the image
indicates that you should reduce the heat source to around
a third of its power.
• To start the timer: press the touches
• Programme the cooking time.
• Start with the heat source at maximum power.
• You can change the cooking time at any point
by pressing the
• As soon as ActiCook
temperature, the timer rings and the
countdown begins.
• Reduce the power of the heat source to
around one third.
• At the end of the cooking time, the timer rings.
• To stop the timer ringing, press the
buttons.
• Turn off the heat source.
I add the
ingredients
3
I programme the
cooking time
your pressure cooker heats up
8
Fig. 12
+ -
or buttons.
®
has reached the cooking
2
I close
ActiCook
®
4
0
I set the heat source
to maximum power
+ -
or .
+ -
or
I select
or .
1/2
/
MAXI
The timer must be
clipped to the
pressure cooker in
order to work.
During cooking,
check that the valve
murmurs regularly.
If there is not
enough steam,
increase the heat
source slightly; if
there is too much
steam, reduce the
heat source.
-
Fixed programmed
time
+