Configuration Error - Glamox NL95 User Manual

Main power supply OK
MAIN
Main power supply ALARM
MAIN
EMERG.
Emergency power supply OK
EMERG. Emergency power supply ALARM
SYS Power Supply module ITNSLP-01P communication OK
Power Supply module ITNSLP-01P module communication ALARM
SYS
NOTE: In case that ITNSLP-01P module communication is in alarm,
power supply main and emergency indication will be unavailable
MODULES
Communication with light input modules OK
One or more light modules communication ALARM
MODULES
For detailed status of modules and communication reset pls. enter system/status screen
MODULES
No module configured, or in configuration mode
IMPORTANT!!!
REMOTE CONTROL ENABLED - the system is controlled from remote location by
communication protocol. Local control of lights is unavailable, checking light status is possible.
Please check separate document for further information
If INVALID CONFIGURATION is shown, this means that one or more lights are missing either
connection or position on mimic. Please check configuration section
If system was not correctly switched off, i.e. power supply blackout, on next system start-up alarm type
"SHUTDOWN ALARM" will be initiated. Pls. check picture above.
IMPORTANT!!! All lights that were switched on before shutdown will be restored automatically. Pls. check
if appropriate lights are switched on.
MAIN
PS

CONFIGURATION ERROR

LIGHTS
31
EMERG. SYS MODULES
SB
GROUPS LIGHTS
Rev.: 4, Print date: 2021-05-05
NL95