Configuration Screens - Glamox NL95 User Manual

4.3 Configuration screens

In this screen, all lights with their properties, that will be used in the system, need to be added
1 Tap on light name to select it
and view its properties
2 Scrollable configured lights list
which shows light:
- Number
- Name
- Double or Single
- Icon shape
- Icon color
3 3 Add new light below the selected light
4 Delete selected light
5 Return back to configuration main
screen
6 Properties of selected light
PROPERTIES :
1. ANCHOR FWD
POSITION :
Tap on light name to enter name via keyboard
7
Tap on list icon to select name from list
Light icon shape: circle, rectangle, hexagon.
8
9
Alarm: enable, disable. This function is related to light failure monitoring and alarming it in case of
10
failure detection.
If ALARM is DISABLED, alarm will not be initiated.
IMPORTANT!!! As per rules and regulations for navigation and signal light, alarm must be enabled!!!
11 Selection if light has a spare
Information of light has been assigned with position on mimic and connection on Input module
12 13
LIGHTS
1. ANCHOR FWD
1
4. PORT
2
9. STERN
+ -
3 4
7
Tap on list icon to
8
select name from the list
9
10
Select name or
11
Tap on return key
12
13
19
PROPERTIES :
M
1. ANCHOR FWD
M S
M S
M S
M S
M S
M
M
POSITION :
M
S
S
S
S
S
SELECT LIGHT NAME
Rev.: 4, Print date: 2021-05-05
NL95
6
5