Safety Instructions - Glamox NL95 User Manual

2. Safety instructions

System contains dangerous voltages when connected to line voltages. Only a
competent technician should carry out the installation / service.
Do not touch the electrical parts when power supply line is connected.
While repairs or inspection is made, the power supply line must be disconnected.
"POWER ON/OFF" switch does not disconnect the power supply line. Power
supply line is still present on terminals, Power Supply module, and Input
modules.
Navigation and Signal Lights Controller is open equipment. That is, equipment may
only be installed in consoles and cabinets which provide front panel access for
operating devices (main unit). Power Supply and Input modules must be easily
reachable in case of manual operation of lights.
For manual operating of lights special precautions needs to be taken in order that
"live parts" are not touched. For manual operation of lights use only insulated
screwdriver.
IMPORTANT!!!
Navigation and Signal Lights Controller needs to be installed in accordance with rules and
regulations of classification societies as well as in accordance with good electrotechnical
practice.
Use of non appropriate lights could lead to irregular operation of Navigation and Signal Lights
Controller and navigation lights which could indanger safe navigation of the ship. Special
precautions need to be taken to check the compatibility of non-bulb and non-Glamox LED
lights.
Operating manual of used navigation and signal lights needs to be considered.
7
NL95
Rev.: 4, Print date: 2021-05-05